Форум Donate Engine

Поддержка CMS Donate Engine

Вы не вошли.

#21 2019-06-16 15:57:23

Online
Administrator
Регистрация: 2009-11-19
Кол-во сообщений: 2,164

Re: Не открываются инвентари игроков .dat (возможно баг в cms).

Настроить нужно только фтп. Листинг файла настроек ProFTPd \etc\proftpd.conf:

# This is the ProFTPD configuration file
#
# See: http://www.proftpd.org/docs/directives/linked/by-name.html

# Security-Enhanced Linux (SELinux) Notes:
#
# In Fedora and Red Hat Enterprise Linux, ProFTPD runs confined by SELinux
# in order to mitigate the effects of an attacker taking advantage of an
# unpatched vulnerability and getting control of the ftp server. By default,
# ProFTPD cannot read or write most files on a system nor connect to many
# external network services, but these restrictions can be relaxed by
# setting SELinux booleans as follows:
#
# setsebool -P allow_ftpd_anon_write=1
#   This allows the ftp daemon to write to files and directories labelled
#   with the public_content_rw_t context type; the daemon would only have
#   read access to these files normally. Files to be made available by ftp
#   but not writeable should be labelled public_content_t.
#
# setsebool -P allow_ftpd_full_access=1
#   This allows the ftp daemon to read and write all files on the system.
#
# setsebool -P allow_ftpd_use_cifs=1
#   This allows the ftp daemon to read and write files on CIFS-mounted
#   filesystems.
#
# setsebool -P allow_ftpd_use_nfs=1
#   This allows the ftp daemon to read and write files on NFS-mounted
#   filesystems.
#
# setsebool -P ftp_home_dir=1
#   This allows the ftp daemon to read and write files in users' home
#   directories.
#
# setsebool -P ftpd_connect_all_unreserved=1
#   This setting is only available from Fedora 16/RHEL-7 onwards, and is
#   necessary for active-mode ftp transfers to work reliably with non-Linux
#   clients (see http://bugzilla.redhat.com/782177), which may choose to
#   use port numbers outside the "ephemeral port" range of 32768-61000.
#
# setsebool -P ftpd_connect_db=1
#   This setting allows the ftp daemon to connect to commonly-used database
#   ports over the network, which is necessary if you are using a database
#   back-end for user authentication, etc.
#
# setsebool -P ftpd_is_daemon=1
#   This setting is available only in Fedora releases 4 to 6 and Red Hat
#   Enterprise Linux 5. It should be set if ProFTPD is running in standalone
#   mode, and unset if running in inetd mode.
#
# setsebool -P ftpd_disable_trans=1
#   This setting is available only in Fedora releases 4 to 6 and Red Hat
#   Enterprise Linux 5, and when set it removes the SELinux confinement of the
#   ftp daemon. Needless to say, its use is not recommended.
#
# All of these booleans are unset by default.
#
# See also the "ftpd_selinux" manpage.
#
# Note that the "-P" option to setsebool makes the setting permanent, i.e.
# it will still be in effect after a reboot; without the "-P" option, the
# effect only lasts until the next reboot.
#
# Restrictions imposed by SELinux are on top of those imposed by ordinary
# file ownership and access permissions; in normal operation, the ftp daemon
# will not be able to read and/or write a file unless *all* of the ownership,
# permission and SELinux restrictions allow it.

# Server Config - config used for anything outside a <VirtualHost> or <Global> context
# See: http://www.proftpd.org/docs/howto/Vhost.html

# Trace logging, disabled by default for performance reasons
# (http://www.proftpd.org/docs/howto/Tracing.html)
#TraceLog			/var/log/proftpd/trace.log
#Trace				DEFAULT:0

ServerName			"ProFTPD server"
ServerIdent			on "FTP Server ready."
ServerAdmin			root@localhost
DefaultServer		on

# Cause every FTP user except adm to be chrooted into their home directory
DefaultRoot			~ !adm

# Use pam to authenticate (default) and be authoritative
#AuthPAMConfig			proftpd
#AuthOrder			mod_auth_pam.c* mod_auth_unix.c
AuthOrder			mod_sql.c
# If you use NIS/YP/LDAP you may need to disable PersistentPasswd
#PersistentPasswd		off

################################################################################################################
AllowStoreRestart on

LoadModule mod_sql.c
LoadModule mod_sql_mysql.c
#LoadModule mod_quotatab.c
#LoadModule mod_quotatab_sql.c

# The passwords in MySQL are encrypted using CRYPT
#SQLAuthTypes            Plaintext Crypt
#SQLAuthenticate         users groups

SQLBackend				mysql
SQLEngine				on
#SQLPasswordEngine		on
SQLAuthenticate         on
SQLAuthTypes			Plaintext Crypt

SQLConnectInfo			proftpd@localhost proftpd proftpd
SQLUserInfo				users userid passwd uid gid homedir shell
SQLGroupInfo            groups groupname gid members
SQLUserWhereClause      "disabled != 1"
SQLLog PASS             updatecount
SQLNamedQuery           updatecount UPDATE "login_count=login_count+1, last_login=now() WHERE userid='%u'" users

SQLLog RETR             bytes-out-count
SQLNamedQuery           bytes-out-count UPDATE "bytes_out_used=bytes_out_used+%b WHERE userid='%u'" users
SQLLog RETR             files-out-count
SQLNamedQuery           files-out-count UPDATE "files_out_used=files_out_used+1 WHERE userid='%u'" users

SQLLog STOR             bytes-in-count
SQLNamedQuery           bytes-in-count UPDATE "bytes_in_used=bytes_in_used+%b WHERE userid='%u'" users
SQLLog STOR             files-in-count
SQLNamedQuery           files-in-count UPDATE "files_in_used=files_in_used+1 WHERE userid='%u'" users

# used to connect to the database
# databasename@host database_user user_password
#SQLConnectInfo  ftp@localhost ftp ftp


# Here we tell ProFTPd the names of the database columns in the "usertable"
# we want it to interact with. Match the names with those in the db
#SQLUserInfo     ftpuser userid passwd uid gid homedir shell

# Here we tell ProFTPd the names of the database columns in the "grouptable"
# we want it to interact with. Again the names match with those in the db
#SQLGroupInfo    ftpgroup groupname gid members

# set min UID and GID - otherwise these are 999 each
SQLMinID        500

# create a user's home directory on demand if it doesn't exist
#SQLHomedirOnDemand on
CreateHome on 775

# Update count every time user logs in
#SQLLog PASS updatecount
#SQLNamedQuery updatecount UPDATE "count=count+1, accessed=now() WHERE userid='%u'" ftpuser

# Update modified everytime user uploads or deletes a file
#SQLLog  STOR,DELE modified
#SQLNamedQuery modified UPDATE "modified=now() WHERE userid='%u'" ftpuser

# User quotas
# ===========
#QuotaEngine off
#QuotaDirectoryTally on
#QuotaDisplayUnits Mb
#QuotaShowQuotas on

#SQLNamedQuery get-quota-limit SELECT "name, quota_type, per_session, limit_type, bytes_in_avail, bytes_out_avail, bytes_xfer_avail, files_in_avail, files_out_avail, files_xfer_avail FROM ftpquotalimits WHERE name = '%{0}' AND quota_type = '%{1}'"

#SQLNamedQuery get-quota-tally SELECT "name, quota_type, bytes_in_used, bytes_out_used, bytes_xfer_used, files_in_used, files_out_used, files_xfer_used FROM ftpquotatallies WHERE name = '%{0}' AND quota_type = '%{1}'"

#SQLNamedQuery update-quota-tally UPDATE "bytes_in_used = bytes_in_used + %{0}, bytes_out_used = bytes_out_used + %{1}, bytes_xfer_used = bytes_xfer_used + %{2}, files_in_used = files_in_used + %{3}, files_out_used = files_out_used + %{4}, files_xfer_used = files_xfer_used + %{5} WHERE name = '%{6}' AND quota_type = '%{7}'" ftpquotatallies

#SQLNamedQuery insert-quota-tally INSERT "%{0}, %{1}, %{2}, %{3}, %{4}, %{5}, %{6}, %{7}" ftpquotatallies

#QuotaLimitTable sql:/get-quota-limit
#QuotaTallyTable sql:/get-quota-tally/update-quota-tally/insert-quota-tally

RootLogin off
RequireValidShell off
################################################################################################################



# Don't do reverse DNS lookups (hangs on DNS problems)
UseReverseDNS			off

# Set the user and group that the server runs as
User				nobody
Group				nobody

# To prevent DoS attacks, set the maximum number of child processes
# to 20.  If you need to allow more than 20 concurrent connections
# at once, simply increase this value.  Note that this ONLY works
# in standalone mode; in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances			20

# Disable sendfile by default since it breaks displaying the download speeds in
# ftptop and ftpwho
UseSendfile			off

# Define the log formats
LogFormat			default	"%h %l %u %t \"%r\" %s %b"
LogFormat			auth	"%v [%P] %h %t \"%r\" %s"

# Dynamic Shared Object (DSO) loading
# See README.DSO and howto/DSO.html for more details
#
# General database support (http://www.proftpd.org/docs/contrib/mod_sql.html)
#   LoadModule mod_sql.c
#
# Support for base-64 or hex encoded MD5 and SHA1 passwords from SQL tables
# (contrib/mod_sql_passwd.html)
#   LoadModule mod_sql_passwd.c
#
# Mysql support (requires proftpd-mysql package)
# (http://www.proftpd.org/docs/contrib/mod_sql.html)
#   LoadModule mod_sql_mysql.c
#
# Postgresql support (requires proftpd-postgresql package)
# (http://www.proftpd.org/docs/contrib/mod_sql.html)
#   LoadModule mod_sql_postgres.c
#
# Quota support (http://www.proftpd.org/docs/contrib/mod_quotatab.html)
#   LoadModule mod_quotatab.c
#
# File-specific "driver" for storing quota table information in files
# (http://www.proftpd.org/docs/contrib/mod_quotatab_file.html)
#   LoadModule mod_quotatab_file.c
#
# SQL database "driver" for storing quota table information in SQL tables
# (http://www.proftpd.org/docs/contrib/mod_quotatab_sql.html)
#   LoadModule mod_quotatab_sql.c
#
# LDAP support (requires proftpd-ldap package)
# (http://www.proftpd.org/docs/directives/linked/config_ref_mod_ldap.html)
#   LoadModule mod_ldap.c
#
# LDAP quota support (requires proftpd-ldap package)
# (http://www.proftpd.org/docs/contrib/mod_quotatab_ldap.html)
#   LoadModule mod_quotatab_ldap.c
#
# Support for authenticating users using the RADIUS protocol
# (http://www.proftpd.org/docs/contrib/mod_radius.html)
#   LoadModule mod_radius.c
#
# Retrieve quota limit table information from a RADIUS server
# (http://www.proftpd.org/docs/contrib/mod_quotatab_radius.html)
#   LoadModule mod_quotatab_radius.c
#
# SITE CPFR and SITE CPTO commands (analogous to RNFR and RNTO), which can be
# used to copy files/directories from one place to another on the server
# without having to transfer the data to the client and back
# (http://www.castaglia.org/proftpd/modules/mod_copy.html)
#   LoadModule mod_copy.c
#
# Administrative control actions for the ftpdctl program
# (http://www.proftpd.org/docs/contrib/mod_ctrls_admin.html)
LoadModule mod_ctrls_admin.c
#
# Support for MODE Z commands, which allows FTP clients and servers to
# compress data for transfer
# (http://www.castaglia.org/proftpd/modules/mod_deflate.html)
#   LoadModule mod_deflate.c
#
# Execute external programs or scripts at various points in the process
# of handling FTP commands
# (http://www.castaglia.org/proftpd/modules/mod_exec.html)
#   LoadModule mod_exec.c
#
# Support for POSIX ACLs
# (http://www.proftpd.org/docs/modules/mod_facl.html)
#   LoadModule mod_facl.c
#
# Support for using the GeoIP library to look up geographical information on
# the connecting client and using that to set access controls for the server
# (http://www.castaglia.org/proftpd/modules/mod_geoip.html)
#   LoadModule mod_geoip.c
#
# Allow for version-specific configuration sections of the proftpd config file,
# useful for using the same proftpd config across multiple servers where
# different proftpd versions may be in use
# (http://www.castaglia.org/proftpd/modules/mod_ifversion.html)
#   LoadModule mod_ifversion.c
#
# Configure server availability based on system load
# (http://www.proftpd.org/docs/contrib/mod_load.html)
#   LoadModule mod_load.c
#
# Limit downloads to a multiple of upload volume (see README.ratio)
#   LoadModule mod_ratio.c
#
# Rewrite FTP commands sent by clients on-the-fly,
# using regular expression matching and substitution 
# (http://www.proftpd.org/docs/contrib/mod_rewrite.html)
#   LoadModule mod_rewrite.c
#
# Support for the SSH2, SFTP, and SCP protocols, for secure file transfer over
# an SSH2 connection (http://www.castaglia.org/proftpd/modules/mod_sftp.html)
#   LoadModule mod_sftp.c
#
# Use PAM to provide a 'keyboard-interactive' SSH2 authentication method for
# mod_sftp (http://www.castaglia.org/proftpd/modules/mod_sftp_pam.html)
#   LoadModule mod_sftp_pam.c
#
# Use SQL (via mod_sql) for looking up authorized SSH2 public keys for user
# and host based authentication
# (http://www.castaglia.org/proftpd/modules/mod_sftp_sql.html)
#   LoadModule mod_sftp_sql.c
#
# Provide data transfer rate "shaping" across the entire server
# (http://www.castaglia.org/proftpd/modules/mod_shaper.html)
#   LoadModule mod_shaper.c
#
# Support for miscellaneous SITE commands such as SITE MKDIR, SITE SYMLINK,
# and SITE UTIME (http://www.proftpd.org/docs/contrib/mod_site_misc.html)
#   LoadModule mod_site_misc.c
#
# Provide an external SSL session cache using shared memory
# (contrib/mod_tls_shmcache.html)
#   LoadModule mod_tls_shmcache.c
#
# Provide a memcached-based implementation of an external SSL session cache
# (contrib/mod_tls_memcache.html)
#   LoadModule mod_tls_memcache.c
#
# Use the /etc/hosts.allow and /etc/hosts.deny files, or other allow/deny
# files, for IP-based access control
# (http://www.proftpd.org/docs/contrib/mod_wrap.html)
#   LoadModule mod_wrap.c
#
# Use the /etc/hosts.allow and /etc/hosts.deny files, or other allow/deny
# files, as well as SQL-based access rules, for IP-based access control
# (http://www.proftpd.org/docs/contrib/mod_wrap2.html)
#   LoadModule mod_wrap2.c
#
# Support module for mod_wrap2 that handles access rules stored in specially
# formatted files on disk
# (http://www.proftpd.org/docs/contrib/mod_wrap2_file.html)
#   LoadModule mod_wrap2_file.c
#
# Support module for mod_wrap2 that handles access rules stored in SQL
# database tables (http://www.proftpd.org/docs/contrib/mod_wrap2_sql.html)
#   LoadModule mod_wrap2_sql.c
#
# Implement a virtual chroot capability that does not require root privileges
# (http://www.castaglia.org/proftpd/modules/mod_vroot.html)
# Using this module rather than the kernel's chroot() system call works
# around issues with PAM and chroot (http://bugzilla.redhat.com/506735)
LoadModule mod_vroot.c
#
# Provide a flexible way of specifying that certain configuration directives
# only apply to certain sessions, based on credentials such as connection
# class, user, or group membership
# (http://www.proftpd.org/docs/contrib/mod_ifsession.html)
#   LoadModule mod_ifsession.c

# Allow only user root to load and unload modules, but allow everyone
# to see which modules have been loaded
# (http://www.proftpd.org/docs/modules/mod_dso.html#ModuleControlsACLs)
ModuleControlsACLs		insmod,rmmod allow user root
ModuleControlsACLs		lsmod allow user *

# Enable basic controls via ftpdctl
# (http://www.proftpd.org/docs/modules/mod_ctrls.html)
ControlsEngine			on
ControlsACLs			all allow user root
ControlsSocketACL		allow user *
ControlsLog			/var/log/proftpd/controls.log

# Enable admin controls via ftpdctl
# (http://www.proftpd.org/docs/contrib/mod_ctrls_admin.html)
<IfModule mod_ctrls_admin.c>
  AdminControlsEngine		on
  AdminControlsACLs		all allow user root
</IfModule>

# Enable mod_vroot by default for better compatibility with PAM
# (http://bugzilla.redhat.com/506735)
<IfModule mod_vroot.c>
  VRootEngine			on
</IfModule>

# TLS (http://www.castaglia.org/proftpd/modules/mod_tls.html)
<IfDefine TLS>
  TLSEngine			on
  TLSRequired			on
  TLSRSACertificateFile		/etc/pki/tls/certs/proftpd.pem
  TLSRSACertificateKeyFile	/etc/pki/tls/certs/proftpd.pem
  TLSCipherSuite		ALL:!ADH:!DES
  TLSOptions			NoCertRequest
  TLSVerifyClient		off
  #TLSRenegotiate		ctrl 3600 data 512000 required off timeout 300
  TLSLog			/var/log/proftpd/tls.log
  <IfModule mod_tls_shmcache.c>
    TLSSessionCache		shm:/file=/var/run/proftpd/sesscache
  </IfModule>
</IfDefine>

# Dynamic ban lists (http://www.proftpd.org/docs/contrib/mod_ban.html)
# Enable this with PROFTPD_OPTIONS=-DDYNAMIC_BAN_LISTS in /etc/sysconfig/proftpd
<IfDefine DYNAMIC_BAN_LISTS>
  LoadModule			mod_ban.c
  BanEngine			on
  BanLog			/var/log/proftpd/ban.log
  BanTable			/var/run/proftpd/ban.tab

  # If the same client reaches the MaxLoginAttempts limit 2 times
  # within 10 minutes, automatically add a ban for that client that
  # will expire after one hour.
  BanOnEvent			MaxLoginAttempts 2/00:10:00 01:00:00

  # Inform the user that it's not worth persisting
  BanMessage			"Host %a has been banned"

  # Allow the FTP admin to manually add/remove bans
  BanControlsACLs		all allow user ftpadm
</IfDefine>

# Set networking-specific "Quality of Service" (QoS) bits on the packets used
# by the server (contrib/mod_qos.html)
<IfDefine QOS>
  LoadModule			mod_qos.c
  # RFC791 TOS parameter compatibility
  QoSOptions			dataqos throughput ctrlqos lowdelay
  # For a DSCP environment (may require tweaking)
  #QoSOptions			dataqos CS2 ctrlqos AF41
</IfDefine>

# Global Config - config common to Server Config and all virtual hosts
# See: http://www.proftpd.org/docs/howto/Vhost.html
<Global>

  # Umask 022 is a good standard umask to prevent new dirs and files
  # from being group and world writable
  Umask				022

  # Allow users to overwrite files and change permissions
  AllowOverwrite		yes
  <Limit ALL SITE_CHMOD>
    AllowAll
  </Limit>

</Global>

# A basic anonymous configuration, with an upload directory
# Enable this with PROFTPD_OPTIONS=-DANONYMOUS_FTP in /etc/sysconfig/proftpd
<IfDefine ANONYMOUS_FTP>
  <Anonymous ~ftp>
    User			ftpserver
    Group			ftpserver
    AccessGrantMsg		"Anonymous login ok, restrictions apply."

    # We want clients to be able to login with "anonymous" as well as "ftp"
    UserAlias			anonymous ftp

    # Limit the maximum number of anonymous logins
    MaxClients			10 "Sorry, max %m users -- try again later"

    # Put the user into /pub right after login
    DefaultChdir		/home/ftpserver/ftp

    # We want 'welcome.msg' displayed at login, '.message' displayed in
    # each newly chdired directory and tell users to read README* files. 
    DisplayLogin		/welcome.msg
    DisplayChdir		.message
    DisplayReadme		README*
	AnonRequirePassword	off

    # Cosmetic option to make all files appear to be owned by user "ftp"
    DirFakeUser			on ftp
    DirFakeGroup		on ftp

    # Limit WRITE everywhere in the anonymous chroot
    <Limit WRITE SITE_CHMOD>
      DenyAll
    </Limit>

    # An upload directory that allows storing files but not retrieving
    # or creating directories.
    #
    # Directory specification is slightly different if mod_vroot is in
    # use: see http://sourceforge.net/p/proftp/mailman/message/31728570/
    #          https://bugzilla.redhat.com/show_bug.cgi?id=1045922
    <IfModule mod_vroot.c>
      <Directory /home/ftpserver/ftp/uploads/*>
        AllowOverwrite		no
        <Limit READ>
          DenyAll
        </Limit>
  
        <Limit STOR>
          AllowAll
        </Limit>
      </Directory>
    </IfModule>
    <IfModule !mod_vroot.c>
      <Directory uploads/*>
        AllowOverwrite		no
        <Limit READ>
          DenyAll
        </Limit>
  
        <Limit STOR>
          AllowAll
        </Limit>
      </Directory>
    </IfModule>

    # Don't write anonymous accesses to the system wtmp file (good idea!)
    WtmpLog			off

    # Logging for the anonymous transfers
    ExtendedLog			/var/log/proftpd/access.log WRITE,READ default
    ExtendedLog			/var/log/proftpd/auth.log AUTH auth

  </Anonymous>
</IfDefine>

Исправил ошибки на стрнице, перекачайте и замените файл shop\app\msmod\inv.php.

Благодарю за скриншоты!

Вне форума

Низ форума